[K4RY] Meeting Tomorrow, 12:30pm Broun Conference Room

[Kris Kirby]

Hi guys,

Kris, KE4AHR here from UABARC, WB4TJX. We're on a Mastr II repeater using a
Pion & Simon controller, and it's a project I completed in the past few
months, so most of it's fresh on my mind. I know a few other guys who know
Mastr IIs, so if you need any help, I can help you find an answer if you
can't find one.

If the repeater is working presently in it's configuration (always test
as-is before changing anything), then adding the Pion and Simon controller
is as simple as:

remove all cards
Install controller
install PL jumper.

On Tue, Feb 28, 2012 at 8:42 AM, Mike Watkins <WATKIJM at auburn.edu> wrote:

>  Hey folks,****
>
> ** **
>
> What model is your 444.800 Machine?  I will have a GE Master II Station
> Repeater****
>
> coming available soon and I wondered if you guys would be interested in
> upgrading****
>
> your 70cm repeater if you didn’t have a GE Master II Repeater already. I
> am taking****
>
> the current GE Master II from the Airport and replacing it with a GE
> Master III repeater.****
>
> We can then reallocate this GE Master II for use for your club. OIT would
> still own****
>
> the repeater but we can’t use it for commercial communications past Jan 1
> st, 2013 ****
>
> because of the FCC’s new narrow-banding mandate deadline.****
>
> ** **
>
> Let me know if you are interested.****
>
> ** **
>
> Respectfully,****
>
> Mike****
>
> WX4AL****
>
> ** **
>
> *From:* k4ry-bounces at mailman.eng.auburn.edu [mailto:
> k4ry-bounces at mailman.eng.auburn.edu] *On Behalf Of *John Klingelhoeffer
> *Sent:* Tuesday, February 28, 2012 7:43 AM
> *To:* antiquekid3 at gmail.com; K4RY at eng.auburn.edu
> *Subject:* Re: [K4RY] Meeting Tomorrow, 12:30pm Broun Conference Room****
>
> ** **
>
> Kyle; ****
>
> ** **
>
> 20 - 40% chance of rain at 12:30 - 15:00 with air temp in the low 60's.
> ****
>
> ** **
>
> Refresh my memory - what did we decide we needed for tools?****
>
> ** **
>
> Open end wrenches, screwdrivers, N to PL-259 adapter, hacksaw, utility
> knife, BPET - was there anything else?****
>
> ** **
>
> Seems like we needed a short piece of pipe to go between the angle bracket
> and the antenna itself?  And compression clamps?  ****
>
> ** **
>
> 73****
>
> ** **
>
> John...  WB4LNM****
>
> -----Original Message-----
> From: Kyle Owen <antiquekid3 at gmail.com>
> To: K4RY <K4RY at eng.auburn.edu>
> Sent: Mon, Feb 27, 2012 11:37 pm
> Subject: [K4RY] Meeting Tomorrow, 12:30pm Broun Conference Room****
>
> Hi folks,****
>
> ** **
>
> Tomorrow is indeed a meeting. We will be talking about how E-Day went****
>
> and what we can do better for next time. We also have some plans for****
>
> putting up the 2m/70cm vertical on the roof, so if weather permits, we****
>
> may be able to do that. Hope to see you all then!****
>
> ** **
>
> 73,****
>
> ** **
>
> Kyle****
>
> W4GNU****
>
> _______________________________________________****
>
> K4RY mailing list****
>
> K4RY at mailman.eng.auburn.edu****
>
> http://mailman.eng.auburn.edu/mailman/listinfo/k4ry****
>
> http://www.auburn.edu/student_info/k4ry/au_k4ry.html****
>
>
> _______________________________________________
> K4RY mailing list
> K4RY at mailman.eng.auburn.edu
> http://mailman.eng.auburn.edu/mailman/listinfo/k4ry
> http://www.auburn.edu/student_info/k4ry/au_k4ry.html
>



-- 
Kris Kirby, KE4AHR  <kris.kirby at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.eng.auburn.edu/pipermail/k4ry/attachments/20120228/63167981/attachment.htm