[Veritas-ha] RE:MultiNICA and ndd settings
Peter DrakeUnderkoffler
pcd at xinupro.com
Wed Jun 25 13:05:42 CDT 2003
Of course you would uncomment the entries you wanted in the
/etc/system file by removing tjhe leading "*"
Thanks
Peter DrakeUnderkoffler
Peter DrakeUnderkoffler wrote:
> Hold the phone, those entries are for a shell script, not the
> /etc/system file.
> The /etc/system entries look like....
>
> * Begin FDX of qfe
> *set qfe:qfe_adv_autoneg_cap=0
> *set qfe:qfe_adv_100T4_cap=0
> *set qfe:qfe_adv_100fdx_cap=1
> *set qfe:qfe_adv_100hdx_cap=0
> *set qfe:qfe_adv_10hdx_cap=0
> *set qfe:qfe_adv_10fdx_cap=0
> * End QFE forced speed and mode
> * End FDX of qfe
>
> The below entries work well in an rc script early on in the boot process.
>
> Thanks
> Peter
>
>
> Negron, Saul wrote:
>
>> On Solaris, put the following in /etc/system ( without the # of course )
>>
>> # ndd -set /dev/qfe instance 0
>> # ndd -set /dev/qfe adv_autoneg_cap 1
>> # ndd -set /dev/qfe adv_10hdx_cap 1
>> # ndd -set /dev/qfe adv_10fdx_cap 1
>> # ndd -set /dev/qfe adv_100hdx_cap 1
>> # ndd -set /dev/qfe adv_100fdx_cap 1
>>
>> This turns on autonegotiation and supports all speeds. If you are
>> using a hub, set the above The hub tends to use its default which is
>> 10 mbits and hence the following error message will be displayed if
>> set to 100 full duplex or other than 10mbits:
>>
>> SUNW,qfe0: Transciever speed set incorrectly.
>> WARNING: SUNW,qfe0: Unable to reset transciever.
>>
>>
>> If no hub is being used, then you can set the appropriate speed on
>> your port.
>>
>>
>> -----Original Message-----
>> From: veritas-ha-request at mailman.eng.auburn.edu
>> [mailto:veritas-ha-request at mailman.eng.auburn.edu]
>> Sent: Friday, June 20, 2003 1:08 PM
>> To: veritas-ha at mailman.eng.auburn.edu
>> Subject: Veritas-ha digest, Vol 1 #706 - 2 msgs
>>
>>
>> Send Veritas-ha mailing list submissions to
>> veritas-ha at mailman.eng.auburn.edu
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-ha
>> or, via email, send a message with subject or body 'help' to
>> veritas-ha-request at mailman.eng.auburn.edu
>>
>> You can reach the person managing the list at
>> veritas-ha-admin at mailman.eng.auburn.edu
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Veritas-ha digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Veritas Support for - Sun Storage Array 3510? (Gowda, Sanjay)
>> 2. MultiNICA and ndd settings (Mcmullen, Juliet)
>>
>> --__--__--
>>
>> Message: 1
>> Date: Thu, 19 Jun 2003 17:31:14 -0500
>> From: "Gowda, Sanjay" <Sanjay.Gowda at wcg.com>
>> To: <veritas-vx at mailman.eng.auburn.edu>,
>> <veritas-ha at mailman.eng.auburn.edu>
>> Subject: [Veritas-ha] Veritas Support for - Sun Storage Array 3510?
>>
>> This is a multi-part message in MIME format.
>>
>> ------_=_NextPart_001_01C336B2.7E140EC7
>> Content-Type: text/plain;
>> charset="iso-8859-1"
>> Content-Transfer-Encoding: quoted-printable
>>
>> Hi All,
>> =20
>> Does anybody have any info on whether VxVM, VxFS, VCS is supported for =
>> the Sun Storage Array - 3510?
>> We are in the process of purchasing these arrays. Just wanted to make =
>> sure we would not run into any issues
>> with Veritas :-) I do not see any reason why there would be any
>> issues. =
>> But any information you could give me
>> would be greatly appreciated.
>> =20
>> Thanks.
>> =20
>> - Sanjay
>>
>> ------_=_NextPart_001_01C336B2.7E140EC7
>> Content-Type: text/html;
>> charset="iso-8859-1"
>> Content-Transfer-Encoding: quoted-printable
>>
>> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>> <HTML><HEAD>
>> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
>> charset=3Diso-8859-1">
>> <TITLE></TITLE>
>>
>> <META content=3D"MSHTML 6.00.2800.1170" name=3DGENERATOR></HEAD>
>> <BODY>
>> <DIV><FONT face=3DArial color=3D#0000ff size=3D2>Hi All,</FONT></DIV>
>> <DIV><FONT face=3DArial color=3D#0000ff size=3D2></FONT> </DIV>
>> <DIV><FONT face=3DArial color=3D#0000ff size=3D2>Does anybody have any =
>> info on=20
>> whether VxVM, VxFS, VCS is supported for the Sun Storage Array -=20
>> 3510?</FONT></DIV>
>> <DIV><FONT face=3DArial color=3D#0000ff size=3D2>We are in the process =
>> of purchasing=20
>> these arrays. Just wanted to make sure we would not run into
>> any=20
>> issues</FONT></DIV>
>> <DIV><FONT face=3DArial color=3D#0000ff size=3D2>with Veritas
>> :-) =
>> I do not see=20
>> any reason why there would be any issues. But any information
>> you =
>> could=20
>> give me</FONT></DIV>
>> <DIV><FONT face=3DArial color=3D#0000ff size=3D2>would be greatly=20
>> appreciated.</FONT></DIV>
>> <DIV><FONT face=3DArial color=3D#0000ff size=3D2></FONT> </DIV>
>> <DIV><FONT face=3DArial color=3D#0000ff size=3D2>Thanks.</FONT></DIV>
>> <DIV><FONT face=3DArial color=3D#0000ff size=3D2></FONT> </DIV>
>> <DIV><FONT face=3DArial color=3D#0000ff size=3D2>- =
>> Sanjay</FONT></DIV></BODY></HTML>
>>
>> ------_=_NextPart_001_01C336B2.7E140EC7--
>>
>> --__--__--
>>
>> Message: 2
>> From: "Mcmullen, Juliet" <juliet.mcmullen at citigroup.com>
>> To: "'veritas-ha at mailman.eng.auburn.edu'"
>> <veritas-ha at mailman.eng.auburn.edu>
>> Date: Wed, 18 Jun 2003 09:52:17 +0100
>> Subject: [Veritas-ha] MultiNICA and ndd settings
>>
>> Hi
>>
>> We have the following MultiNICA resource set up:
>>
>> host1 qfe1 xxx.xxx.xxx.1
>> qfe5 xxx.xxx.xxx.1
>> host2 qfe1 xxx.xxx.xxx.2 qfe5 xxx.xxx.xxx.2
>>
>> Problem is that on failover to the backup interface, it is not set to
>> the
>> correct speed of 100 Mbit fd. Switch and NIC won't autonegotiate up
>> as auto
>> negotiation is disabled in the environment. Is there a way to
>> set/force this
>> anywhere?
>>
>> Thanks
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> --__--__--
>>
>> _______________________________________________
>> Veritas-ha maillist - Veritas-ha at mailman.eng.auburn.edu
>> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-ha
>>
>>
>> End of Veritas-ha Digest
>> This message contains confidential information and is intended only
>> for the individual named. If you are not the named addressee you
>> should not disseminate, distribute or copy this e-mail. Please notify
>> the sender immediately by e-mail if you have received this e-mail by
>> mistake and delete this e-mail from your system.
>>
>> E-mail transmission cannot be guaranteed to be secure or error-free.
>> The sender therefore does not accept liability for any errors or
>> omissions in the contents of this message that arise as a result of
>> e-mail transmission. This message is provided for informational
>> purposes and should not be construed as a solicitation or offer to
>> buy or sell any securities or related financial instruments.
>>
>> All e-mails at Neuberger Berman are, in accordance with Firm policy,
>> to be used for Neuberger Berman business purposes only. E-mails sent
>> from or to the Firm are subject to being reviewed by the Firm in
>> accordance with the Firm's procedure for the review of correspondence
>>
>
>
More information about the Veritas-ha
mailing list