[Veritas-ha] VxVM 3.5 with VVR enabled
MGurugunti at us.nomura.com
Thu Jun 12 09:24:29 CDT 2003
I just installed VM 3.5 MP1 wiht VVR enabled (and VVR from 3.5 MP1), after I
successfully apply the demo licenses, I ran vxinstall, below is what I am
Volume Manager Installation
VxVM will use the following format to name disks on the host:
In the above format, <enclosurename> is the logical name of the enclosure
to which the disk belongs. VxVM assigns default enclosure names which can
be changed according to the user requirements.
Some examples would be:
hitachi0_2 - second disk detected in enclosure 'hitachi0'
enggdept_2 - second disk detected in enclosure 'enggdept'
dgc1_1 - first disk detected in enclosure 'dgc1'
jbod_1 - first disk detected in the jbod category
For non-public loop disks (Ex. FC disks directly connected to the host
or through hubs), you could choose to use the c#t#d#s# naming format.
Do you want to use enclosure based names for all disks ?
[y,n,q,?] (default: n)
Vxvm:vxconfigd: ERROR: /dev/vx/info: No such file or directory
Failure during execution of command : vxconfigd -k -m disable
My machine is connected to Hitachi 9600 series SAN.
Thanks in advance.
----- This message is for the named person's use only. It may contain
confidential, proprietary or legally privileged information. No
confidentiality or privilege is waived or lost by any mistransmission. If
you receive this message in error, please delete it and all copies from your
system, destroy any hard copies and notify the sender. You must not,
directly or indirectly, use, disclose, distribute, print, or copy any part
of this message if you are not the intended recipient. Nomura Holding
America Inc., Nomura Securities International, Inc, and their respective
subsidiaries each reserve the right to monitor all e-mail communications
through its networks. Any views expressed in this message are those of the
individual sender, except where the message states otherwise and the sender
is authorized to state the views of such entity. Unless otherwise stated,
any pricing information in this message is indicative only, is subject to
change and does not constitute an offer to deal at any price quoted. Any
reference to the terms of executed transactions should be treated as
preliminary only and subject to our formal written confirmation.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Veritas-ha