[Veritas-bu] Status 196

[scott.kendall@abbott.com]

Yes, I believe it does check to see if it is still within the backup window
during tape mounts.

I have seen this many times.  A backup is running longer than normal... as you
mentioned, possibly because of a retry after a media error.  It will run fine
for several hours, fill the tape and then error with 196 when it tries to
mount a tape after the window has closed.


- Scott



                                                                                                                                   
                    "Dave Pearson (EML)"                                                                                           
                    <Dave.Pearson at eml.ericsson.se        To:     "'veritas-bu at mailman.eng.auburn.edu'"                             
                    >                                    <veritas-bu at mailman.eng.auburn.edu>                                       
                    Sent by:                             cc:                                                                       
                    veritas-bu-admin at mailman.eng.        Subject:     [Veritas-bu] Status 196                                      
                    auburn.edu                                                                                                     
                                                                                                                                   
                                                                                                                                   
                    10/29/2001 09:14 AM                                                                                            
                                                                                                                                   
                                                                                                                                   




To continue...

Our NT full backup window is set to start at 18:00 on Saturday and end at
06:00 on Sunday.

Here's what I observed:

Backup starts 7 streams at 18:00
2 of the streams terminate normally
5 streams fail with 174 (another story) at 01:08 then restart
Backup writes two more tapes and after end writing at 08:44, 4 streams
terminate with 196
1 stream, writing to a different tape drive, terminates normally at 08:48

Just a thought, does Netbackup check the backup window end time when it mounts
a new tape?

Regards,

Dave Pearson
Ericsson Mobile Communications (UK) Ltd.
' +44 (1256) 774700
* dave.pearson at eml.ericsson.se

_______________________________________________
Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu