Part # for SSA 100 4.2G drives?

[Ralf Wiegand]

Yes, it makes sense when you get the disk drives refurbished from vendor A,
and the brackets from vendor B.  If anybody is interested I can find out the
prices for the brackets.

Ralf

Gregg Mackenzie - SysAdm wrote:

> Tom Jones wrote:
> > The 540-2939 is NOT the drive for an SSA100 series.  That part number
> > is for the SSA200 series that uses the RSM trays.
>
> Tom is correct; 540-2937 is for the SSA100.
>
> Ralf Wiegand wrote:
> >>From the Field Engineer Handbook....
> > 540-2937: 3 1/2, 7200rpm single ended ultra/wide SCSI, SSA(Sun Storage
> > Array) -
> > FRU(Field Replace Unit) w/Bkt 540-2764  $400,- plus shipping cost
> >
> > 540-2939: 3 1/2, 7200rpm single ended ultra/wide SCSI, RSM(A3000) FRU w
> > Bkt
> > 370-2304
> > $400,- plus shipping cost
> >
> > Note: Bkt's are not included.
>
> That note makes no sense.  Both listings above say "w/Bkt", which,
> in my neck of the woods, typically means "with bracket".
>
> Here're the part numbers for the brackets, in case anyone cares:
>
>   540-2764  SSA Bracket
>   540-2412  Seagate SSA bracket, replaced by SSA bracket
>   540-2413  Conner SSA bracket, replaced by SSA bracket
>
> Gregg Mackenzie
> gmackenz@ball.com