[Ncame-students] specimens for machining

Seungjong Lee szl0169 at auburn.edu
Tue Jul 27 17:17:43 CDT 2021


Arash,

I have received the below

Material
Process
Type
Geometry
QTY
Project
Person in Charge
Drawing No.
Color Code
Machining Cost (Quote Number)
316L SS
DED
Fatigue
Cylinder bars
6
NASA
John

Blue
$                                                       162.00

I have not received the below

Material
Process
Type
Geometry
QTY
Project
Color Code
Machining Cost (Quote Number)
Person in Charge

Ti-6Al-4V
L-PBF
Residual
Small bridge
7
NASA
N/A
N/A
John


Best Regards,
Seungjong (John) Lee

From: Ncame-students <ncame-students-bounces at mailman.eng.auburn.edu> On Behalf Of Nabeel Ahmad
Sent: Tuesday, July 27, 2021 4:38 PM
To: Arash Soltani Tehrani <azs0181 at auburn.edu>; ncame-students at eng.auburn.edu; Muztahid Muhammad <mzm0220 at auburn.edu>
Cc: Nima Shamsaei <shamsaei at auburn.edu>
Subject: Re: [Ncame-students] specimens for machining

Hi Arash,
I didn't receive Haynes 282.
Thanks,
Nabeel
Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: Ncame-students <ncame-students-bounces at mailman.eng.auburn.edu<mailto:ncame-students-bounces at mailman.eng.auburn.edu>> on behalf of Muztahid Muhammad <mzm0220 at auburn.edu<mailto:mzm0220 at auburn.edu>>
Sent: Tuesday, July 27, 2021 4:33:28 PM
To: Arash Soltani Tehrani <azs0181 at auburn.edu<mailto:azs0181 at auburn.edu>>; ncame-students at eng.auburn.edu<mailto:ncame-students at eng.auburn.edu> <ncame-students at eng.auburn.edu<mailto:ncame-students at eng.auburn.edu>>
Cc: Nima Shamsaei <shamsaei at auburn.edu<mailto:shamsaei at auburn.edu>>
Subject: Re: [Ncame-students] specimens for machining

Hello Arash,

I didn't receive DED Hastelloy-X mentioned in your list.


Sincerely,



Muztahid Muhammad
Ph.D. Student

Nat'l Cent. for Additive Mfg. Excellence (NCAME)

Dept. of Mechanical Engineering | Auburn University

Website: eng.auburn.edu/ncame

________________________________
From: Ncame-students <ncame-students-bounces at mailman.eng.auburn.edu<mailto:ncame-students-bounces at mailman.eng.auburn.edu>> on behalf of Arash Soltani Tehrani <azs0181 at auburn.edu<mailto:azs0181 at auburn.edu>>
Sent: Tuesday, July 27, 2021 3:06 PM
To: ncame-students at eng.auburn.edu<mailto:ncame-students at eng.auburn.edu> <ncame-students at eng.auburn.edu<mailto:ncame-students at eng.auburn.edu>>
Cc: Nima Shamsaei <shamsaei at auburn.edu<mailto:shamsaei at auburn.edu>>
Subject: [Ncame-students] specimens for machining


All,



I am planning to send an email to the machine shop to get an overall update. Please check the below table and if you have received any of the sets or if I am missing any, please update me. If I don't get reply, I assume everything is good to send the email tomorrow.



  *   Hastelloy X          DED        Fatigue Cylinder bars      12           NASA    Muztahid                             Red        $420                      For comparing HIPed and non-HIPed fatigue behavior
  *   Haynes 282         L-PBF     Fatigue Oversized Dogbone        9              NASA    Green-Red          $243.00                 Nabeel
  *   AlSi10Mg             L-PBF     Fatigue Round bar           30           Navair   Green   $810.00               Shaharyar
  *   IN-939   L-PBF     Tensile  Round bar           6              NASA- Paul         blue                       Mohammad       please do not eliminate markings on the specimens
  *   HR-1      DED        Fatigue Tensile  Flat Sheet                            NASA HR Powder             Different Codes $-           Arash
  *   Al F357  L-PBF     Tensile  Round bar           4              NASA    Green   $108.00               Faysal
  *   Ti-6Al-4V              L-PBF     Residual               Small bridge       7              NASA    N/A        $56.00 John
  *   17-4 PH SS (H1025)          MBJ       Fatigue Round Bars         20           CETIM   Red                        Pooriya CETIM
  *   17-4 PH SS (CA-H1025)   MBJ       Fatigue Round Bars         20           CETIM   Blue                       Pooriya CETIM
  *   17-4 PH SS (CA-H900)     MBJ       Fatigue Round Bars         20           CETIM   Green                   Pooriya CETIM
  *   17-4 PH SS (CA-H1150)   MBJ       Fatigue Round Bars         20           CETIM   Yellow                   Pooriya CETIM
  *   Ti-55511               L-PBF     Tensile  Round Bars         4              GE          Blue                       Salman FOP - FAA 1.8
  *   Ti-55511               L-PBF     Fatigue Round Bars         20           GE          Blue                       Salman FOP - FAA 1.8
  *   Ti-64      L-PBF     Fatigue Round Bars         24           GE          Yellow                   Salman FOP - FAA 1.8
  *   Ti-64      L-PBF     Tensile  Round Bars         4              GE          Yellow                   Salman FOP - FAA 1.8
  *   Ti-64      L-PBF     Fatigue Round Bars         24           GE          Red                        Salman FOP - FAA 1.8
  *   Ti-64      L-PBF     Tensile  Round Bars         4              GE          Red                        Salman FOP - FAA 1.8

Thanks,
Arash
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.eng.auburn.edu/pipermail/ncame-students/attachments/20210727/5b630274/attachment.htm>


More information about the Ncame-students mailing list