[Ncame-students] Work on Current Materials

Pooriya Dastranjy Nezhadfar pzd0022 at auburn.edu
Wed Sep 23 08:42:27 CDT 2020


I don't think they have started this one yet.

From: Michael Knotts <mjk0017 at auburn.edu>
Sent: Wednesday, September 23, 2020 8:41 AM
To: Pooriya Dastranjy Nezhadfar <pzd0022 at auburn.edu>; ncame-students at eng.auburn.edu
Subject: Re: Work on Current Materials

That I'm not sure. That is the material I have the least information on, and there may not be any current work on it. It was listed on NASA's full material sheet, but it looks like they don't have an ongoing project. If there are any NASA AlSi10Mg projects currently that would be what I'm looking for.

Thanks,


Michael Knotts

Research Engineer/Lab Manager

National Center for Additive Manufacturing Excellence (NCAME)

Samuel Ginn College of Engineering

Auburn University

Phone: 334-844-2415

Email: mjk0017 at auburn.edu<mailto:Aah0007 at auburn.edu>





________________________________
From: Pooriya Dastranjy Nezhadfar <pzd0022 at auburn.edu<mailto:pzd0022 at auburn.edu>>
Sent: Wednesday, September 23, 2020 8:38 AM
To: Michael Knotts <mjk0017 at auburn.edu<mailto:mjk0017 at auburn.edu>>; ncame-students at eng.auburn.edu<mailto:ncame-students at eng.auburn.edu> <ncame-students at eng.auburn.edu<mailto:ncame-students at eng.auburn.edu>>
Subject: RE: Work on Current Materials


Michael,



What project is AlSi10Mg for?



Regards,

Pooriya



From: Ncame-students <ncame-students-bounces at mailman.eng.auburn.edu<mailto:ncame-students-bounces at mailman.eng.auburn.edu>> On Behalf Of Michael Knotts
Sent: Wednesday, September 23, 2020 8:37 AM
To: ncame-students at eng.auburn.edu<mailto:ncame-students at eng.auburn.edu>
Subject: [Ncame-students] Work on Current Materials



All,

Could anyone tell me who is working on producing and testing samples here for AlSi10Mg, Ti-6Al-4V, and 316L Stainless Steel? I'm putting together a comprehensive list of tracking for Dr. Shamsaei and  don't know who's projects these are. I appreciate the help!



Thanks,



Michael Knotts

Research Engineer/Lab Manager

National Center for Additive Manufacturing Excellence (NCAME)

Samuel Ginn College of Engineering

Auburn University

Phone: 334-844-2415

Email: mjk0017 at auburn.edu<mailto:Aah0007 at auburn.edu>






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.eng.auburn.edu/pipermail/ncame-students/attachments/20200923/127d7ee3/attachment.html>


More information about the Ncame-students mailing list