[Ncame-students] Hastelloy X tensile bars for machining

Nima Shamsaei shamsaei at auburn.edu
Tue Oct 13 13:21:52 CDT 2020


Michael,

Please serve as the POC.

Thanks,

NS

From: Arash Soltani Tehrani <azs0181 at auburn.edu>
Sent: Tuesday, October 13, 2020 1:20 PM
To: Nima Shamsaei <shamsaei at auburn.edu>
Cc: Seyed Ghiaasiaan <srg0041 at auburn.edu>; Michael Knotts <mjk0017 at auburn.edu>; ncame-students at eng.auburn.edu; Muztahid Muhammad <mzm0220 at auburn.edu>
Subject: Re: [Ncame-students] Hastelloy X tensile bars for machining

Dr. Shamsaei

I think the contact person is Randall Wiliamson (“

rwilliamson at umc.edu<mailto:rwilliamson at umc.edu>”). I found his info in one of the emails Rakish sent to them.

Very Respectfully,

Arash Soltani-Tehrani
Ph.D. Student | Auburn University
AM Laboratory Coordinator | Nat’l Cent. for Additive Mfg. Excellence (NCAME)
Senator | Graduate Student Council (GSC) | Auburn University
Phone: (334) 497-2159
Email: azs0181 at auburn.edu<mailto:azs0181 at auburn.edu> |
Website: eng.auburn.edu/ncame
________________________________
From: Ncame-students <ncame-students-bounces at mailman.eng.auburn.edu<mailto:ncame-students-bounces at mailman.eng.auburn.edu>> on behalf of Nima Shamsaei <shamsaei at auburn.edu<mailto:shamsaei at auburn.edu>>
Sent: Tuesday, October 13, 2020 1:12:54 PM
To: Patricio Carrion <pec0016 at auburn.edu<mailto:pec0016 at auburn.edu>>
Cc: Seyed Ghiaasiaan <srg0041 at auburn.edu<mailto:srg0041 at auburn.edu>>; Michael Knotts <mjk0017 at auburn.edu<mailto:mjk0017 at auburn.edu>>; ncame-students at eng.auburn.edu<mailto:ncame-students at eng.auburn.edu> <ncame-students at eng.auburn.edu<mailto:ncame-students at eng.auburn.edu>>; Muztahid Muhammad <mzm0220 at auburn.edu<mailto:mzm0220 at auburn.edu>>
Subject: Re: [Ncame-students] Hastelloy X tensile bars for machining


Thanks,



From: Patricio Carrion <pec0016 at auburn.edu<mailto:pec0016 at auburn.edu>>
Sent: Tuesday, October 13, 2020 1:12 PM
To: Nima Shamsaei <shamsaei at auburn.edu<mailto:shamsaei at auburn.edu>>
Cc: Seyed Ghiaasiaan <srg0041 at auburn.edu<mailto:srg0041 at auburn.edu>>; ncame-students at eng.auburn.edu<mailto:ncame-students at eng.auburn.edu>; Michael Knotts <mjk0017 at auburn.edu<mailto:mjk0017 at auburn.edu>>; Muztahid Muhammad <mzm0220 at auburn.edu<mailto:mzm0220 at auburn.edu>>
Subject: Re: [Ncame-students] Hastelloy X tensile bars for machining



Dr. Shamsaei,



I do not think anyone has been in contact with them. I will ask Jonathan to get their contact and coordinate with Michael.

Kind regards,



Patricio Carrion



On Oct 13, 2020, at 11:47 AM, Nima Shamsaei <shamsaei at auburn.edu<mailto:shamsaei at auburn.edu>> wrote:



All,



I know Jonathan and Rakish were in touch with UMMC. Who is coordinating our specimen machining with them now?



Thanks,



NS



From: Seyed Ghiaasiaan <srg0041 at auburn.edu<mailto:srg0041 at auburn.edu>>
Sent: Tuesday, October 13, 2020 11:45 AM
To: Nima Shamsaei <shamsaei at auburn.edu<mailto:shamsaei at auburn.edu>>
Cc: Michael Knotts <mjk0017 at auburn.edu<mailto:mjk0017 at auburn.edu>>; Muztahid Muhammad <mzm0220 at auburn.edu<mailto:mzm0220 at auburn.edu>>
Subject: Hastelloy X tensile bars for machining



Dr Shamsaei,

The L-PBF Hastelloy X tensile specimens (bars) were heat treated by Muztahid and they are ready to be machine and tested in the as-machined surface condition for the paper.

As per Michael, we cannot do the machining in house.

Please advise how to outsource this.

Thanks,
Seyed R Ghiaasiaan

_______________________________________________
Ncame-students mailing list
Ncame-students at mailman.eng.auburn.edu<mailto:Ncame-students at mailman.eng.auburn.edu>
https://mailman.eng.auburn.edu/mailman/listinfo/ncame-students
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.eng.auburn.edu/pipermail/ncame-students/attachments/20201013/97de6a67/attachment.html>


More information about the Ncame-students mailing list