[Ncame-students] Hastelloy X tensile bars for machining
Arash Soltani Tehrani
azs0181 at auburn.edu
Tue Oct 13 13:19:48 CDT 2020
Dr. Shamsaei
I think the contact person is Randall Wiliamson (“
rwilliamson at umc.edu”). I found his info in one of the emails Rakish sent to them.
Very Respectfully,
Arash Soltani-Tehrani
Ph.D. Student | Auburn University
AM Laboratory Coordinator | Nat’l Cent. for Additive Mfg. Excellence (NCAME)
Senator | Graduate Student Council (GSC) | Auburn University
Phone: (334) 497-2159
Email: azs0181 at auburn.edu |
Website: eng.auburn.edu/ncame
________________________________
From: Ncame-students <ncame-students-bounces at mailman.eng.auburn.edu> on behalf of Nima Shamsaei <shamsaei at auburn.edu>
Sent: Tuesday, October 13, 2020 1:12:54 PM
To: Patricio Carrion <pec0016 at auburn.edu>
Cc: Seyed Ghiaasiaan <srg0041 at auburn.edu>; Michael Knotts <mjk0017 at auburn.edu>; ncame-students at eng.auburn.edu <ncame-students at eng.auburn.edu>; Muztahid Muhammad <mzm0220 at auburn.edu>
Subject: Re: [Ncame-students] Hastelloy X tensile bars for machining
Thanks,
From: Patricio Carrion <pec0016 at auburn.edu>
Sent: Tuesday, October 13, 2020 1:12 PM
To: Nima Shamsaei <shamsaei at auburn.edu>
Cc: Seyed Ghiaasiaan <srg0041 at auburn.edu>; ncame-students at eng.auburn.edu; Michael Knotts <mjk0017 at auburn.edu>; Muztahid Muhammad <mzm0220 at auburn.edu>
Subject: Re: [Ncame-students] Hastelloy X tensile bars for machining
Dr. Shamsaei,
I do not think anyone has been in contact with them. I will ask Jonathan to get their contact and coordinate with Michael.
Kind regards,
Patricio Carrion
On Oct 13, 2020, at 11:47 AM, Nima Shamsaei <shamsaei at auburn.edu<mailto:shamsaei at auburn.edu>> wrote:
All,
I know Jonathan and Rakish were in touch with UMMC. Who is coordinating our specimen machining with them now?
Thanks,
NS
From: Seyed Ghiaasiaan <srg0041 at auburn.edu<mailto:srg0041 at auburn.edu>>
Sent: Tuesday, October 13, 2020 11:45 AM
To: Nima Shamsaei <shamsaei at auburn.edu<mailto:shamsaei at auburn.edu>>
Cc: Michael Knotts <mjk0017 at auburn.edu<mailto:mjk0017 at auburn.edu>>; Muztahid Muhammad <mzm0220 at auburn.edu<mailto:mzm0220 at auburn.edu>>
Subject: Hastelloy X tensile bars for machining
Dr Shamsaei,
The L-PBF Hastelloy X tensile specimens (bars) were heat treated by Muztahid and they are ready to be machine and tested in the as-machined surface condition for the paper.
As per Michael, we cannot do the machining in house.
Please advise how to outsource this.
Thanks,
Seyed R Ghiaasiaan
_______________________________________________
Ncame-students mailing list
Ncame-students at mailman.eng.auburn.edu<mailto:Ncame-students at mailman.eng.auburn.edu>
https://mailman.eng.auburn.edu/mailman/listinfo/ncame-students
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.eng.auburn.edu/pipermail/ncame-students/attachments/20201013/23f05e26/attachment.html>
More information about the Ncame-students
mailing list