Remote base, permanently wired to 52.525, IRLP/Echolink/Allstar link, remote control / patch link for radios located at the station... NASA [shuttle] mission audio...<br><br>Alternatively, one can go the other way with it and put up a full-duplex packet repeater at 1200 bps, 9600 BPS, or get wild and build a PACSAT-style "screaming-demon" which allows users with software to automatically collect files if other users are retrieving them... <br>
<br>Another idea would be to place another machine on the same frequency on the other side of campus. Because of the FM capture effect, it's possible to open one machine when the other cannot hear and so on. If the two machines are at the extremes of campus, the entire campus should be covered by one of them. One could link them over 900MHz back to the 2m machine (which I assume is in the middle of campus)'s site and do voting there and return the audio back out over 900MHz. (900MHz mobiles transmit at ~902MHz and recieve at 927 MHz; 900MHz repeaters can be made from 900MHz Motorola Maxtracs with new conventional firmware if the Talkaround VCO is present. These too will become obsolete in 2013. The 800MHz Maxtrac will, when the input filter has been removed, tune from around 800MHz to 999MHz and may require VCO adjustment, but will do the frequencies.)<br>
<br>A repeater, if it comes with cans and/or support, is not a resource to turn away. =D<br><br><div class="gmail_quote">On Tue, Feb 28, 2012 at 7:54 PM, John Klingelhoeffer <span dir="ltr"><<a href="mailto:wb4lnm@aol.com">wb4lnm@aol.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><font color="black" face="Arial, Helvetica, sans-serif" size="5"><font face="Arial, Helvetica, sans-serif" size="5">Good evening, Mike;</font>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif"><br>
</div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif">The current 440 repeater is a Yaesu VXR-5000 with an Arcom commercial programmable controller that has been quite 'tightly' integrated. That is, the normal repeater controller that comes inside the Yaesu repeater has been bypassed with hardwired connections to the external controller. A while back, the documentation that had gone missing over the years on the commercial hardware suite comprising the repeater was collected and a replacement copy of software to program the controller was kindly supplied by Arcom. Adding to problems for maintenance, documentation for this integration has not stayed with the Clubs several moves. This makes it very difficult to maintain without significant investment in time and effort. </div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif"><br>
</div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif">Other than updating the configuration of the controller (such as resetting the real time clock and the like), there is little to do to improve on the functionality of the Arcom controller, which is quite capable. Similarly, other than a somewhat low power output, the Yaesu Vertex repeater seems to be fairly solid in un-shielded areas on campus. </div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif"><br>
</div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif">My opinion (not to be confused with the Club's response to this offer) is that little utility would be gained from the effort of changing out the 440 repeater *in its current location*. The location on top of Haley Center with its limited height above average terrain is severely limiting to any VHF repeater, and even more so for a UHF repeater. This location covers the campus very, very well, but as I understand it was never intended to be a 'wide area repeater'. With the paucity of activity on both of the repeaters in the past couple of years, I'm not sure what an additional UHF campus coverage repeater would do for the members. </div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif"><br>
</div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif">However, that said, it would be hard to turn down such a generous offer, especially IF it could simply be retuned and used with its own internal controller, rather than the hard to maintain lash-up on the current 440 repeater. There is little or no use for the tremendous functionality in the Arcom controller for basic communications. This, and perhaps increased transmitter power, would make an easier to maintain repeater with better on-campus building penetration. </div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif"><br>
</div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif">I hope you and the Club can discuss this more to see what mutual benefit can be gained.</div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif"><br>
</div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif">73</div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif"><br>
</div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif">John...</div>
<div style="font-size:18pt;font-family:Arial,Helvetica,sans-serif">WB4LNM</div>
<div><br>
<div style="font-size:10pt;font-family:arial,helvetica"><div class="im">-----Original Message-----<br>
From: Mike Watkins <<a href="mailto:WATKIJM@auburn.edu" target="_blank">WATKIJM@auburn.edu</a>><br>
To: John Klingelhoeffer <<a href="mailto:wb4lnm@aol.com" target="_blank">wb4lnm@aol.com</a>>; antiquekid3 <<a href="mailto:antiquekid3@gmail.com" target="_blank">antiquekid3@gmail.com</a>>; K4RY <<a href="mailto:K4RY@eng.auburn.edu" target="_blank">K4RY@eng.auburn.edu</a>><br>
Sent: Tue, Feb 28, 2012 8:42 am<br>
Subject: RE: [K4RY] Meeting Tomorrow, 12:30pm Broun Conference Room<br>
<br>
</div><div>
<div><div class="im">
<div class="MsoNormal"><span style="font-size:14.0pt">Hey folks,</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt"> </span></div>
<div class="MsoNormal"><span style="font-size:14.0pt">What model is your 444.800 Machine? I will have a GE Master II Station Repeater</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt">coming available soon and I wondered if you guys would be interested in upgrading</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt">your 70cm repeater if you didn’t have a GE Master II Repeater already. I am taking</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt">the current GE Master II from the Airport and replacing it with a GE Master III repeater.</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt">We can then reallocate this GE Master II for use for your club. OIT would still own</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt">the repeater but we can’t use it for commercial communications past Jan 1<sup>st</sup>, 2013
</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt">because of the FCC’s new narrow-banding mandate deadline.</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt"> </span></div>
<div class="MsoNormal"><span style="font-size:14.0pt">Let me know if you are interested.</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt"> </span></div>
<div class="MsoNormal"><span style="font-size:14.0pt">Respectfully,</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt">Mike</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt">WX4AL</span></div>
<div class="MsoNormal"><span style="font-size:14.0pt"> </span></div>
</div><div class="MsoNormal"><a href="http://www.auburn.edu/student_info/k4ry/au_k4ry.html" style="font-size:10pt;font-family:arial,helvetica" target="_blank">u_k4ry.html</a></div>
</div>
</div>
</div>
</div>
</font><br>_______________________________________________<br>
K4RY mailing list<br>
<a href="mailto:K4RY@mailman.eng.auburn.edu">K4RY@mailman.eng.auburn.edu</a><br>
<a href="http://mailman.eng.auburn.edu/mailman/listinfo/k4ry" target="_blank">http://mailman.eng.auburn.edu/mailman/listinfo/k4ry</a><br>
<a href="http://www.auburn.edu/student_info/k4ry/au_k4ry.html" target="_blank">http://www.auburn.edu/student_info/k4ry/au_k4ry.html</a><br></blockquote></div><br><br clear="all"><br>-- <br>Kris Kirby, KE4AHR <<a href="mailto:kris.kirby@gmail.com">kris.kirby@gmail.com</a>> <br>