<html><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">
Hi gang,<div><br></div><div>Actually, the beam antenna wrapped in plastic is not a home-brew. It is a Tennadyne T-12 log-periodic antenna donated to the club by Jimmy Lee (AE4HF, Rogersville, AL). Yah, it IS huge. Somewhere, I have the assembly instructions...<div><br></div><div>John Hung<br><div><div><br><div><div><div>On Sep 29, 2010, at 9:38 PM, <a href="mailto:WB4LNM@aol.com">WB4LNM@aol.com</a> wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite"> <font id="role_document" color="#000000" size="3" face="Arial"> <div>I did not get a reply back about a meeting late afternoon Wednesday, so I went into the Club station early and spent a few hours picking and cleaning up.</div> <div> </div> <div>Most of the cable is now sorted and in some form of organized stacks. The equipment is moved into reasonable locations in the room.</div> <div> </div> <div>While we will possibly get a couple of used PC's from the Department, I did set up and try the existing machine for the iGate. Worked ok until it got to the keyboard test. The keyboard PS2 plug had been broken off the cord at some time and thus it hung there. I'll most likely bring in one of my old ones to continue work. The cleanup did find the power cord for the Alinco DR-110 2 meter transceiver for the iGate, but I'll need tools to connect it to the power supply on the next trip. </div> <div> </div> <div>Byron and I powered on the Heathkit transmitter / receiver pair and all tubes lit. While they look a little rough on the outside, the insides are pretty clean. I later found a speaker that would plug into the receiver and got a LOT of hum, indicating some bad power supply capacitors. Not surprising given they are 40 or more years old. I'll try to find or order some new ones. They will also need the 'widowmaker' 2 prong power cords replaced with 3 wire grounded cords. This will be a good and useable set of HF gear if we get it back up and working. </div> <div> </div> <div>There is an old 440 MHz repeater in there that was most likely the 'first' K4RY 440 repeater. It's an oldie, but might be useful to recrystal as a fixed frequency transceiver for communicating through the 440 repeater, or as part of a cross link to tie the 440 and 2 meter repeaters together via Broun Hall. Another couple of old hulks are of dubious worth, and may get trashed after Club review and approval. </div> <div> </div> <div>A huge, homebrew beam is sitting in one corner wrapped up in plastic wrap. I have no idea who made it or what bands it covers. It is taking up a lot of room and we need to figure out what to do with it to get it out of the room since we already have a very nice commercial antenna. Perhaps we should donate it to one of the other local clubs that might need a beam and has the location to install it. </div> <div> </div> <div>That's it for this week. Again, if the Club would like a short demo of the HRD software, I can do that, but I do need some advance notice and we need a room with a projector at the Union for all to see.</div> <div> </div> <div>Please also remember that there is a VE testing session upcoming soon. So if you want that first license or want to upgrade, plan ahead! </div> <div> </div> <div>73</div> <div> </div> <div>John...</div> <div>WB4LNM</div> <div> </div> <div>Alumni advisor</div> <div> </div> <div> </div> <div> </div> <div> </div> <div> </div> <div> </div></font></blockquote></div><br></div></div></div></div></div></body></html>